Omnitron Systems Technology FlexSwitch 6550 FK - Manual (Page 3)

1.0 INTRODUCTION
1.1 General Description
The 6550-FK is the direct replacement for the discontinued FlexSwitch
Model 600XC 1Fx + 4U. The 6550-FK replacement kit consists of one
iConverter 10/100Base-Tx to 100Base-Fx Media Converter Module and
one iConverter 4Tx Switch Module installed in a iConverter 2-Module
Chassis.
The 6550-FK provides auto-negotiating 10/100 UTP ports with auto-crossover
that enables easy attachment to hubs, switches and workstations. The
100Base-Fx fiber port supports half or full duplex operation.
The 6550-FK features on-board and front panel accessible DIP-Switches for
manual configuration of the ports.
1.2 Chassis Models
FlexSwitch Replacement Matrix
Discontinued Part Replacement Part
6550-0 6550-0-FK
6550-2 6550-2-FK
6550-3 6550-3-FK
6551-0 6551-0-FK
6551-2 6551-2-FK
Replacement Matrix
FlexSwitch Model 6550
Fiber Type Distance
Connector Type
SC ST
MM 5km 6550-0-FK 6551-0-FK
SM 30km 6550-2-FK 6551-2-FK
SM 60km 6550-3-FK -
Model Numbers
Page 3