Omnitron Systems Technology iConverter 10/100 - Manual

iConverter iConverter
®
The iConverter 10/100 managed media converters are
members of the modular iConverter product family, and provide
10BASE-T or 100BASE-TX to 100BASE-FX fiber conversion.
The
iConverter 10/100 modules are available with multimode,
single-mode and single-fiber options, and support ST, SC
and LC connectors. The UTP port supports 10/100 and Half/
Full-Duplex auto-negotiation with both hardware and software
manual override. A UTP crossover switch eliminates the need
for a crossover cable and facilitates connectivity to network
equipment. The 10/100 also features two Ethernet Backplane
ports to provide connectivity to adjacent modules for network
expansion and for in-band connectivity to an iConverter
Network Management Module.
The 10/100 features user-selectable Link Propagate, Link
Segment and Remote Fault Detection modes to facilitate quick
fault detection, isolation and reporting.
iConverter 10/100 modules are hot-swappable and can be
mounted in a 19-Module (2U high) or 5-Module (1U high) rack-
mountable chassis (19-inch or 23-inch) with any combination
of redundant AC, 24VDC or 48VDC power supplies. They
can also be mounted in a 2-Module AC or 18 to 60VDC powered
chassis, or in a 1-Module AC/DC powered chassis.
The iConverter Multi-Service Platform consists of Network
Interface Devices, T1/E1 multiplexers, CWDM multiplexers
and managed media converters that combine to deliver
Carrier Ethernet and TDM services over fiber or CWDM
wavelengths. This flexible architecture supports a wide variety
of configurations for scalable and reliable fiber connectivity in
Service Provider and Enterprise networks.
The ■ iConverter 10/100 is an IEEE 802.3 compatible
10BASE-T or 100BASE-TX to Fast Ethernet
fiber converter
Supports multimode, single-mode, and single-fiber with ■
ST, SC and LC connectors
UTP port with 10/100 automatically supports Half or ■
Full-Duplex auto-negotiation with a manual crossover
switch
User-selectable link fault detection modes facilitate ■
quick fault detection, isolation and reporting
Management is available with the addition of a ■
management module to the chassis
SNMP management via ■ NetOutlook ® provides real-
time port and module information, remote parameter
configuration and trap notification
Modules are hot-swappable in 19-Module, 5-Module, ■
2-Module or 1-Module chassis
LED displays for immediate visual status of each port ■
Wide Temperature models available with temperature ■
range of -40 to +60º C
Lifetime Warranty and free 24/7 Technical Support ■
iConverter
10/100
10BASE-T or 100BASE-TX to Fast Ethernet Managed Media Converter
Key Features