MacDon R80 Rotary Disc - Manual (Page 19)

OPERATION
Form # 169089
17
Model Year - 2009
6.4 HEADER DETACHMENT
Refer to the M150 & M200 Self-Propelled
Windrower Operator’s Manual for procedures for
mechanically detaching the header from the self-
propelled windrower. Refer to the following
procedures for disconnecting electrical harness
and hydraulic hoses.
CAUTION
To prevent accidental movement of tractor,
shut off engine, engage parking brake, and
remove key.
6.4.1 M200 – 13 FT & 16 FT
a. Move LH (cab forward) platform to rear of
tractor.
b. Disconnect the two hydraulic couplers from
tractor valve.
c. If grass seed header is being detached,
disconnect two couplers at the aft valve and the
single coupler at the forward valve.
d. Raise lever (A) and undo Velcro straps (B).
e. Move hose bundle (C) to store on header. If
grass seed header is being detached, there are
two hose bundles to store on the header.
f. Install caps on connectors and hose ends if
equipped.
(continued next page)
C
B
A
AFT VALVE BLOCK
FWD VALVE BLOCK