MacDon R80 Rotary Disc - Manual (Page 99)

OPTIONS
Form # 169089
97
Model Year - 2009
9 OPTIONS AND
ATTACHMENTS
9.1 GAUGE ROLLER KIT
The gauge roller kit installs at either end of
the cutterbar and the rollers can be adjusted
for varying cutting height. The kit includes
two roller assemblies and attachment
hardware. It is available only for the 16 foot
header.
9.2 SKID SHOE KIT
The skid shoe kit installs at either end of the
cutterbar and the shoes can be adjusted for
varying cutting height. The kit includes two
skid shoe assemblies and attachment
hardware. It is available only for the 16 foot
header.
9.3 SKID PLATE LIFT KIT
The skid plate lift kit consists of spacer
assemblies that attach to the existing skid
plates to increase the ground clearance by
approximately 2 inches (51 mm). The kit
includes four assemblies and attachment
hardware.
9.4 TALL CROP DIVIDER KIT
The tall crop dividers attach to the ends of the
header for clean crop dividing and cutterbar entry
in tall crops. The kit includes left and right
dividers and attachment hardware.
9.5 CUTTERBAR REPAIR TOOL KIT
The cutterbar repair tool kit contains the
necessary tools for replacement of the cutterbar
idler gears. Refer to the Technical Service
Manual for instructions.
9.6 DOUBLE WINDROW ATTACHMENT
The double windrow attachment (DWA) can be
attached to the M Series Windrower Tractor to
enable double windrowing. The kit includes all
the necessary fittings and instructions.