MacDon R80 Rotary Disc - Manual (Page 21)

OPERATION
Form # 169089
19
Model Year - 2009
f. At the header, disconnect electrical connector by
turning collar counterclockwise and pulling
connector to disengage.
g. Disconnect the two drive couplers, and case
drain coupler on header.
h. Move hose bundle from header and locate on
tractor LH side with hoses in support (D).
i. Rotate lever (A) clockwise and push to engage
bracket.
j. Locate electrical harness through support (D)
and attach cap to electrical connector (E).
k. Move tractor platform back to closed position.
l. Detach header from tractor. Refer to the M150
& M200 Self-Propelled Windrower Operator’s
Manual for procedures for mechanically
detaching the header from the self-propelled
windrower.
6.5 TRANSPORTING WINDROWER
Refer to M150 & M200 Self-Propelled
Windrower Operator’s Manual for transporting
headers when attached to the M150/M200
windrower tractor.
6.6 LIGHTS
The turn signal lights
and hazard lights,
which are mounted on
both ends of the
header, are activated
by switches in the M
Series windrower
tractor cab. Only the
16 ft model is
equipped with lights.
D
A D
E