MacDon R80 Rotary Disc - Manual (Page 80)

MAINTENANCE/SERVICE
Form # 169089
78
Model Year - 2009
7.9.9.4 Installation – Bevel Gearbox
DANGER
Stop engine and remove key from ignition
before leaving operator's seat for any
reason. A child or even a pet could engage
an idling machine.
a. Lower gearbox (Y) into position through top
opening.
NOTE
On 16 ft header, ensure hourglass
deflector drive belts are engaged onto
gearbox shaft.
b. Install four bolts (X). Torque to 106 ft·lbf (144
N·m).
c. Position driveline (V) in drum, and slide U-joint
(W) onto drive shaft.
d. Install four bolts (U) and torque to 92 ft·lbf (125
N·m).
e. Position guard (S) and tighten bolts (R).
f. Position guard (Q) and attach with two bolts (P).
(continued next page)
U
V
W
P
Q
R
S
X
13 FT
Y
Y
16 FT