MacDon R80 Rotary Disc - Manual (Page 35)

OPERATION
Form # 169089
33
Model Year - 2009
6.14 STORAGE
Do the following at the end of each operating
season:
a. Clean the windrower thoroughly.
CAUTION
Never use gasoline, naphtha or any volatile
material for cleaning purposes. These
materials may be toxic and/or flammable.
b. Store in a dry, protected place if possible. If
stored outside, always cover windrower with a
waterproof canvas or other protective material.
c. Raise header and engage header lift cylinder
lock-outs.
d. If possible, block up the windrower to take
weight off tires.
e. Repaint all worn or chipped painted surfaces to
prevent rust.
f. Loosen drive belts.
g. Lubricate the header thoroughly, leaving excess
grease on fittings to keep moisture out of
bearings. Apply grease to exposed threads,
cylinder rods and sliding surfaces of
components. Oil cutterbar components to
prevent rust.
h. Check for worn components and repair as
necessary.
i. Check for broken components and order
replacement from your dealer. Attention to
these items right away will save time and effort
at beginning of next season.
j. Replace or tighten any missing or loose
hardware. Refer to Section 7.3.1,
Recommended Torques.
k. Remove tall crop dividers (if equipped) to reduce
space required for inside storage.