MacDon R80 Rotary Disc - Manual (Page 93)

MAINTENANCE/SERVICE
Form # 169089
91
Model Year - 2009
7.12.2 Interval Maintenance
INTERVAL SERVICE
FIRST USE Refer To BREAK-IN INSPECTIONS (previous page).
100 HOURS OR
ANNUALLY *
1. Check Bevel Gearbox Lubricant Level.
2. Check Conditioner Drive Belt Tension. Except Grass Seed Header. See Section
7.9.3.1.
3. Check Hourglass Deflector Belt Tension – 16 Ft Only. See Section 7.9.2.1.
END OF
SEASON
Refer To Section 6.14, STORAGE.
10 HOURS OR
DAILY
1. Check Hydraulic Hoses And Lines For Leaks.
2. Check Cutter Blades For Security And Condition.
3. Check Hourglass Deflectors For Security And Condition.
25 HOURS
1. Grease Cutterbar Driveline Bearings.
2. Grease Roll Universal Shafts. Except Grass Seed Header.
50 HOURS
1. Grease Roll Universal Shafts. Except Grass Seed Header.
2. Grease Roll Shaft Bearings. Except Grass Seed Header.
3. Grease Drive Belt Tensioner. Except Grass Seed Header.
4. Grease Gauge Roller Bearings.
5. Grease
Converging Drum Bearings (Grass Seed Header).
250 HOURS
1. Change Bevel Gearbox Lubricant.
2. Change Cutterbar Lubricant. Use only specified amount. Do not overfill.
* IT IS RECOMMENDED THAT ANNUAL MAINTENANCE BE DONE PRIOR TO START OF OPERATING
SEASON.