RKI Instruments Pioneer 16R User Manual
Page 7
Advertising
Connecting External Alarms
Perform the following procedure to connect external alarms to the Pioneer.
N O T E
: The analyzer card includes external alarm connections that are dedicated to the applicable
channel only.
1. Guide the wiring of the external alarm to the rear of the subrack.
CAUTION
:
If the external alarm device is powered by AC current, do not route the external alarm
wiring and detector wiring through the same conduit hub or cable. The external alarm wiring may
disrupt the transmission of the detector signal to the Pioneer.
Pioneer-R16 Operator’s Manual
Installation & Startup
6
Advertising