Robustel R3000 NU - Manual (Page 110)

Robustel GoRugged R3000 NU User Guide
RT_UG_R3000 NU_v.1.0.0 24.03.2014 109 / 110
Confidential
ICMP detection retries : 3
reset the interface : no
*********************************************
R3000 NU # configure
R3000 NU (config) # set eth0
ethernet interface type: WAN
type select:
1. Static IP
2. DHCP
3. PPP0E
->please select mode (1-3) [1]:
->IP address [192.168.0.1]:58.1.1.1 //set IP address for eth0
->Netmask [255.255.255.0]:255.0.0.0
->gateway [192.168.0.254]:58.1.1.254 //set gateway for eth0
->mtu value (1024-1500)[1500]:
->input primary DNS [192.168.0.254]:58.1.1.254 //set dns for eth0
->input secondary DNS [0.0.0.0]:
this parameter will be take effect when reboot!
really want to modify[yes]:
R3000 NU (config) # end
R3000 NU# write //save current configuration
Building configuration...
OK
R3000 NU # reload
! Reboot the system? 'yes' or 'no': yes //reload to take effect
5.3 Commands reference
commands syntax description
Debug Debug parameters Turn on or turn off debug function
Export Export parameters Export vpn ca certificates
Import Import parameters Import vpn ca cerfiticates
Syslog syslog Export log information to tftp server
Load Load default Restores default values
Write Write Save current configuration parameters
tftp
Tftp IP-address get {cfg|rootfs}
file-name
Import configuration file or update firmware via tftp
Show Show parameters
Show current configuration of each function , if we need to see
all please using “show running ”