Robustel R3000 NU - Manual (Page 48)

Robustel GoRugged R3000 NU User Guide
RT_UG_R3000 NU_v.1.0.0 24.03.2014 47 / 110
Confidential
Report Type
Select from “NMEA GGA+VTG”, “NMEA GGA+VTG+RMC” and “NMEA
RMC”.
NMEA GGA+VTG: Global Positioning System Fix Data（GGA）+ Track Made
Good and Ground Speed（VTG）.
NMEA GGA+VTG+RMC: Global Positioning System Fix Data（GGA）+ Track
Made Good and Ground Speed（VTG）+ Recommended Minimum Specific
GPS/TRANSIT Data（RMC）.
NMEA RMC: Recommended Minimum Specific GPS/TRANSIT Data（RMC）.
NMEA
GGA+VTG
Report Interval Set the interval to report GPS status to GPS Server. 0
Socket Type
Select from “TCP Server”, “TCP Client” and “UDP”.
TCP Client: Router works as TCP client, initiate TCP connection to TCP
server (GPS Server), the server address supports both IP and domain name.
TCP Server: Router works as TCP server (GPS Server), listening for
connection request from TCP client.
UDP: Router works as UDP client.
TCP Server
Local Port @ TCP Server Set the local port number of TCP server. 0
Server Address @ TCP
Client
Set the Server address of TCP server. Null
Server Port @ TCP Client
Set the remote Port number of TCP server.
Note: router supports up to 3 GPS servers, supports re-connect when the
TCP connection is down.
0
This section allows users to check the GPS status.
GPS Status @ GPS
Item Description Default
GPS Status
Show the GPS Status.
GPS status includes: Not Installed, Disabled, No Fix/Invalid, Standalone GPS
Fix, Differential GPS Fix.
Not Installed: No GPS module inside.
Disabled: GPS function is not enabled (not click “Enable GPS” in item “GPS
Not
Installed