Robustel R3000 NU - Manual (Page 26)

Robustel GoRugged R3000 NU User Guide
RT_UG_R3000 NU_v.1.0.0 24.03.2014 25 / 110
Confidential
Download Sytem
Diagnosing Data
Click Download System Diagnosing Data to download diagnose file.
Manual Refresh
Select from “5 Seconds”, “10 Seconds”, “15 Seconds”, “30 Seconds” and “1 Minute”.
User can select these intervals to refresh the log information.
3.10 Configuration -> Link Management
This section allows users to set the WAN link and the related parameters.
Link Management
Item Description Default
Primary Interface
Selected from “Eth0”, “WiFi”.
1. Eth0: Select to make Eth0 as the primary WAN link.
2. WiFi: Select to make WiFi as the primary WAN link.
Eth0
Backup Interface
Selected from “None”, “Eth0”, “WiFi”.
1. None: Do not select backup interface.
2. Eth0: Select Eth0 as the backup WAN link.
3. WiFi: Select WiFi as the backup WAN link.
None
ICMP Detection Primary
Server Router will ping this primary address/domain name to check that if the
current connectivity is active.
Null
ICMP Detection
Secondary Server
Router will ping this secondary address/domain name to check that if the
current connectivity is active.
Null
ICMP Detection Interval Set the ping interval. Null
ICMP Detection Timeout Set the ping timeout. 30
ICMP Detection Retries
If Router ping the preset address/domain name time out continuously for Max
Retries time, it will consider that the connection has been lost.
3