Robustel R3000 NU - Manual (Page 52)

Robustel GoRugged R3000 NU User Guide
RT_UG_R3000 NU_v.1.0.0 24.03.2014 51 / 110
Confidential
Port.
Protocol
Select from “TCP”, “UDP”, “TCP&UDP”, “ICMP” or “ALL”.
If you don’t know what kinds of protocol of your application, we recommend you
select “ALL”.
TCP
Note: You can use “-“to define a range of IP addresses or ports, e.g. 1.1.1.1-2.2.2.2, 10000-12000.
Note: the filtering settings should be divided into two parts. Part 1 is the Exact Filter List and Part 2 is the Default
Filter Policy. The priority of Exact Filter List is higher than Default Filter Policy. It means that while Router receive IP
packets from WAN side, it will check the Exact Filter List first, if the IP packets mismatch the Exact Filter List, then
Router will execute the Default Filter Policy.
Mac-Binding @ Firewall
Item Description Default
Mac-IP Bounding
The defined host (MAC) on the LAN side only can use the defined IP address to
communicate with router, or will be rejected.
Null
Mac Address Enter the defined host’s Mac Address. Null
IP Address Enter the defined host’s IP Address. Null
3.19 Configuration -> QoS
This section allows users to set the QoS parameters.