Robustel R3000 NU - Manual (Page 28)

Robustel GoRugged R3000 NU User Guide
RT_UG_R3000 NU_v.1.0.0 24.03.2014 27 / 110
Confidential
Enable Bridge @ LAN
Interface Enable to make Eth0 works under bridge mode with Eth1. Eth0 and
Eth1 will have the same IP address under this mode.
Enable
IP Address, Netmask,
MTU, Media Type@ LAN
Interface
Set the IP address, Netmask, MTU and Media Type of Eth0. These
parameters will be un-configurable if you enable Bridge.
Null
Multiple IP Address @
LAN Interface
Assign multiple IP addresses for Eth0. Null
Enable DHCP Server @
DHCP Server Enable to make router can lease IP address to DHCP clients which
connect to Eth0.
Disable
IP Pool Start, IP Pool End
@ DHCP Server Define the beginning (IP Pool Start) and end (IP Pool End) of the pool of
IP addresses which will lease to DHCP clients.
Null
Netmask @ DHCP Server
Define the Netmask which the DHCP clients will obtain from DHCP
server.
Null
Lease Time @ DHCP
Server(min) Define the time which the client can use the IP address which obtained
from DHCP server.
60
Primary/Secondary
DNS Server @ DHCP
Server
Define the primary/secondary DNS Server which the DHCP clients will
obtain from DHCP server.
Null
Windows Name Server @
DHCP Server Define the WINS Server which the DHCP clients will obtain from DHCP
server.
Null
Static Lease @ DHCP
Server Define to lease static IP Addresses, which conform to MAC Address of
the connected equipment.
Null
 When “Ethernet Interface Type” is selected as “WAN” type: