Robustel R3000 NU - Manual (Page 46)

Robustel GoRugged R3000 NU User Guide
RT_UG_R3000 NU_v.1.0.0 24.03.2014 45 / 110
Confidential
Delay
Available when enable Pulse in Alarm On Action/Alarm Off Action.
The first pulse will be generated after a “Delay”.
Input from 0 to 30000ms. (0=generate pulse without delay)
0
Low
Available when enable Pulse in Alarm On Action/Alarm Off Action.
In Pulse Output mode, the selected digital output channel will generate a square
wave as specified in the pulse mode parameters. The low level widths are specified
here.
Input from 1 to 30000 ms.
10
High
Available when enable Pulse in Alarm On Action/Alarm Off Action.
In Pulse Output mode, the selected digital output channel will generate a square
wave as specified in the pulse mode parameters. The high level widths are
specified here.
Input from 1 to 30000 ms.
10
Output
Available when enable Pulse in Alarm On Action/Alarm Off Action.
The number of pulses, input from 0 to 30000. (0 for continuous pulse output)
0
3.15 Configuration -> USB
This section allows users to set the USB parameters.
Note: Users can insert an USB storage device, such as U disk and hard disk, into the router’s USB interface. If there is
configuration file or firmware of R3000 NU inside the USB storage devices, R3000 NU will automatically update the
configuration file or firmware. We will provide another file to show how to do USB automatic update.
USB
Item Description Default
Enable automatic update
of configuration Click Enable to automatically update the configuration file of R3000 NU when
insert the USB storage devices which has R3000 NU’s configuration file.
Disable
Enable automatic update
of firmware Click Enable to automatically update the firmware of R3000 NU when insert
the USB storage devices which has R3000 NU’s firmware.
Disable
3.16 Configuration -> GPS
This section allows users to set the GPS setting parameters.