Schwank P40U Fenwal - Manual (Page 34)

34
P40U-F / P40U-IF I&O Manual
IM101220
RD: MAY 2014
RL: 5A
USE THE BLACK BARS BELOW AS A GUIDE FOR AD-
JUSTMENT. USE THE BARS THAT COINCIDE WITH
THE FORMAT & SIZE OF THIS PUBLICATION .
23. SPARK IGNITER SET UP
Use the following diagram to check the Igniter gap. If the gap is incorrect all adjustments
should be made to the GROUND PRONG/PIN ONLY! DO NOT BEND THE IGNITER
PRONG!!!!
3/16” 1/4”
3/16” 1/4”
IF this manual is in
8.5” x 11” “booklet” format
(pages folded in half)
then use these bars
IF this manual is printed
8.5” x 11” “full page” format
use these bars
OR
ADJUST