Schwank ThermoControl Plus Series CM-485 User Manual
Page 12
- 12 -
ThermoControl-Plus 2
*0000h: Hi: Controller type code (36h),
Lo: Version number.
0002h: No
function
0004h: Disable or enable buttons individually. Detailed in Appendix.
0006h: Simulation of pushing a button . Detailed in Appendix
0008h: Special button combinations. Detailed in Appendix
000Ah: Simulation of releasing a button.
000Ch: in Zone 1 control is enabled (On) or disabled (Off), 1: On, 0: Off
000Eh: in Zone 2 control is enabled (On) or disabled (Off), 1: On, 0: Off
0010h: in Zone 3 control is enabled (On) or disabled (Off), 1: On, 0: Off
0012h: in Zone 4 control is enabled (On) or disabled (Off), 1: On, 0: Off
0014h: No function
0016h: No
function
0018h: No
function
001Ah: No function
001Ch: Set value type selection in Zone 1:
0000h:
Based on time program,
0001h: Frost
protection
value (continuously)
0002h:
Night value (continuously)
0003h:
Day value (continuously)
001Eh: Set value type selection in Zone 2: same as described at Zone 1
0020h: Set value type selection in Zone 3: same as described at Zone 1
0022h: Set value type selection in Zone 4: same as described at Zone 1
0024h: No function
0026h: No function
0028h: No
function
002Ah: No function
002Ch: Zone1 Day set value ×10 with plus/minus sign.
Example: 00C7h 19.9°C
002Eh: Zone2 Day set value ×10 with plus/minus sign
0030h: Zone3 Day set value ×10 with plus/minus sign
0032h: Zone4 Day set value ×10 with plus/minus sign
0034h: No
function
0036h: No
function
0038h: No
function
003Ah: No
function
003Ch: Zone1 Night set value ×10 with plus/minus sign
003Eh: Zone2 Night set value ×10 with plus/minus sign
0040h: Zone3 Night set value ×10 with plus/minus sign
0042h: Zone4 Night set value ×10 with plus/minus sign
0044h: No
function
0046h: No
function
0048h: No
function
004Ah: No
function
004Ch: Zone1 Frost protection value ×10 with sign. This value acts as a low limit for all
of the other set values. Factory settings: 0050h 8.0°C
004Eh: Zone2 Frost protection value ×10 with sign
0050h: Zone3 Frost protection value ×10 with sign
The *-marked addresses are “Read-only” types