Sulky RS 350 - 1000 - Manual (Page 43)

RS Centrifugal Spreader.................................................................................................................................................... Page 41
In addition, we expressly draw your attention to the following points:
- Before starting work, anyone responsible for work on and with the
spreader agrees to:
* observe the basic instructions for safety at work and accident preven-
tion
* have read and understood the safety chapter and the warnings in the
safety instructions.
- The equipment must be compliant with the provisions of the Road Traf-
fic Act and the Road Traffic Type Approval Law (e.g. lighting, warning
notices, etc.) as soon as it is used on a public thoroughfare.
Even tractors with equipment, which are not used on a public tho-
roughfare, are subject to the provisions concerning weights and axle
loads.
3.2.Safety at work
- Before using, ensure that the attaching parts are correctly positioned,
especially those for the projection discs and blades.
- The spreader should only be filled with the product to be spread when
the towing vehicle engine is turned off, the ignition key removed and
the applicator chutes are closed.
- Before adjustment or other work (e.g. lubricating or cleaning the sprea-
der) deactivate the power take-off, turn off the engine and remove the
ignition key. Wait until all the rotating parts have stopped completely.
- Never place hands, feet or clothing in the vicinity of moving parts.
Avoid wearing loose clothing. Do not place your hands in the spreader
– Rotating tools!
- Do not put foreign bodies in the spreader reservoir.
- Before activation and during use of the spreader, the user must ensure
there is no-one in the hazardous area around the spreader. Ensure
there is sufficient visibility!
(Continued on the following page)
Safety