Sulky RS 350 - 1000 - Manual (Page 45)

RS Centrifugal Spreader.................................................................................................................................................... Page 43
3.4.Safety during maintenance
- Before adjustment or other work (e.g. lubricating or cleaning the sprea-
der) deactivate the power take-off, turn off the engine and remove the
ignition key. Wait until all the rotating parts have stopped completely.
- Make sure that during the checks and repairs no-one unintentionally
starts the spreading equipment.
- No-one must stand between the vehicle and the spreader without the
correct safety measures to maintain the vehicle in the stopped position,
using the handbrake and/or stop chocks.
DANGER OF INJURY DUE TO ROTATING PARTS
Only start the spreader when all the safety devices are mounted and se-
cured.
Check that the RS centrifugal spreader is ready to operate and in perfect condition!
3.5.Prohibition of arbitrary conversions
No modifications whatsoever should be undertaken on the RS centrifugal spreader or its
accessories without the express, written authorisation of SULKY.
3.6.Hazards due to non-compliance with safety instructions
- Danger of bodily injury or death for the user or a third party.
- Damage to the machine and other material goods belonging to the user.
- Hazards for the working efficiency of the machine.
Safety