Réglages settings einstellungen – Sulky Optiline MP User Manual

Page 63

Advertising
background image

Drillmaschine abschalten

Die Drillmaschine kann von beiden Seiten angehalten
werden.

a .

Seite wählen

• Durch Schließen der Schieber mit 1 einzigen

Bohrung auf der linken und zwei Bohrungen auf
der rechten Seite. (MP 3)

• Mit 1/2 Verteilerblockseite

(für den MP 3,5m - und MP 4,5m)

b .

Jeweilige Klappen schließen (position 0).

c .

Kraft-Handkurbel bei feststehender Maschine

mehrmals betätigen, um das gesamte Saatgut
auf der zu stoppenden Halbbreite
zurückzuhalten. (bei kleinkörnigem Saatgut wie
bspw. Raps muss dieser Vorgang unbedingt
durchgeführt werden).

Nach Befahren des Feldrandes,

- Klappen öffnen und wieder in ursprüngliche

Position bringen,

- Saatgutverteilung bei festehender Maschine mit

mehreren Umdrehungen der Kraft-Handkurbel
einleiten (bei kleinkörnigem Saatgut wie bspw.
Raps muss dieser Vorgang unbedingt
durchgeführt werden).

Disengaging the half drill

You can stop the left-hand or right-hand 1/2 distribution unit.

a .

Select which side

• by closing the shutter with only 1 perforation for

the LH side or 2 perforations for the RH side
(MP 3)

• by 1/2 distribution assembly

(on the MP 3.5 – and MP 4.5m)

b .

Close the corresponding shutters (position 0).

c .

Turn the fitted outlet crankhandle a few times to

remove all the seeds from the half-width that is
to be closed off (essential when sowing small
seeds such as rape).

After the plot border pass,

- Open the shutters and reset to their original

position

- Turn the fitted outlet crankhandle a few times to

prime the distribution unit (essential when
sowing small seeds such as rape).

FR

GB

DE

61

Débrayage 1/2 semoir

Vous avez le choix de stopper la 1/2 distribution à droite ou
à gauche.

a .

Choisir le coté

• Par la fermeture des trappes avec 1 seule

perforation pour le côté gauche et deux
perforations pour le côté droit. (MP 3)

• Par 1/2 bloc de distribution

(pour le MP 3,5 - MP4 - MP 4,5)

b .

Fermer les trappes correspondantes (position 0).

c .

Réaliser quelques tours de manivelle de débit à

poste fixe afin de retirer toute la semence sur la
demi-largeur à stopper. (impératif lors de semis
de petites graines tel que le colza).

Après avoir réalisé votre passage en bord de
parcelle,

- Ouvrir les trappes et les remettre à leur position

initiale,

- Amorcer la distribution avec quelques tours de

manivelle de débit à poste fixe

(impératif lors de semis de petites graines tel
que le colza).

Réglages

Settings

Einstellungen

F

F

F

Advertising