Waldmann PULSE PIR version IV - with MFT, Typ II - Manual (Page 32)

32
Operating Manual Light Control „PULSE HFMD / PULSE PIR - Vers. IV“ ENG
Loading setting level 3
Actuation Display
Light bar LED 1 (dark green)
Parameterisation mode ON
Show follow-up time
Setting functions 3.1 to 3.6
Loading the parameterisation mode
Light bar LEDs 1+2+3
Level 3
Press both keys again
twice
for 5 seconds each
Follow-up time
Function for setting the time after
which the light is to be switched off
if no presence is detected.
By default, the follow-up time is
set to 10 min.
6 different follow-up times from 5
to 30 min can be set.
The function can be changed on
- Lights equipped with HFMD
sensor
- Lights equipped with PIR sensor
Light bar LEDs 1-6
some are flashing
5 min
10 min
15 min
20 min
25 min
30 min
Press both keys
for at least 10 seconds
2 x
Continued >
Release both keys