Wasp Barcode WaspLabeler +2D User Manual - Manual (Page 107)

103
Wasp Labeler User Manual
Format Tab:
The Format tab allows you to specify an exact location for a selected text box on your label. You can
also enter precise height and width measurements on this tab. Below is an example of the Format tab.
The Format tab is divided into two sections: General and Text..
Format tab - General options are:
• Object Name - You can optionally enter a new name for the text box object.
• Left - Enter the precise location you want your barcode relative to the left side of the label.
• Top - Enter the precise location you want your barcode relative to the top of the label.
• Width - Enter the width of your text box.
• Height - Enter the height of your text box.
• Rotate - Rotate the text box on your label.
• Display on Print - Make sure this checkbox is selected if you want the text box to display when
your label is printed.
• Anchor - Select where you want to anchor the text box on the page. For example, if you set
the Anchor to Right, if the text box grows or shrinks due to variable data from a data source,
the Right side will stay in the same position and the text box will "grow" from the left. If you
anchor it Center, the center position will stay the same and the text box will "grow" from the
right and left.