Wasp Barcode WaspLabeler +2D User Manual - Manual (Page 137)

133
Wasp Labeler User Manual
Example Data and Time Format Expressions
Enter a custom date format in the format shown below:
[DATEFORMAT:<format string here>]
The “DATEFORMAT:” prefix must be specified, followed by the <format string here> section.
Inside the <format string here> you can enter any valid formatting string from the table above. The []
brackets are required.
Example 1
[DATEFORMAT:dd/MM/yyyy]
If the value Oct 4, 1973 is entered, the Test Results will display 04/10/1973 as shown in the screen
example below:
Example 2
[DATEFORMAT: hh:mm:ss]
If the value Dec 1, 2011 5:15:35 PM is entered, the Test Results will display 05:15:35.