Gs1-14 properties box options, Gs1 limited, Gs1 stacked omnidirectional – Wasp Barcode WaspLabeler +2D User Manual User Manual
Page 99
95
Wasp Labeler User Manual
GS1-14 Properties Box Options
The table below lists the options available for GS1-14 Code in the Properties box > Barcode tab.
Field
Description
Symbology
Select GS1-14 from the drop down list. For a complete list of
available symbologies along with examples and descriptions of each,
please refer to the topic
Bar Width
This setting determines density of the barcode. Increase the bar
width (applies to the individual bars in the barcode) and the density is
decreased. You might want a more dense barcode to fit on a small
label, for example. Keep in mind that a barcode that is too dense
may be harder for a scanner to read and may not be scannable at all.
Bar Height
This setting determines how tall your barcode will be. The bar height
does not affect density.
GS1 Limited
The table below lists the options available for GS1 Limited Code in the Properties box > Barcode tab.
Field
Description
Symbology
Select GS1 Limited from the drop down list. For a complete list of
available symbologies along with examples and descriptions of each,
please refer to the topic
Bar Width
This setting determines density of the barcode. Increase the bar
width (applies to the individual bars in the barcode) and the density is
decreased. You might want a more dense barcode to fit on a small
label, for example. Keep in mind that a barcode that is too dense
may be harder for a scanner to read and may not be scannable at all.
Bar Height
This setting determines how tall your barcode will be. The bar height
does not affect density.