Wasp Barcode WaspLabeler +2D User Manual - Manual (Page 179)

175
Wasp Labeler User Manual
4.15 Removing the Data Source Connection
To completely break a connection with a data source and remove the data source's information from
your project, use the Remove Connection function. You will use this function if you want to delete
the data source information and change your label to a static label (that does not use an external data
source at all) or if you want to change to a different external data source type.
Note: If you want to change to a data source within the same type, CSV to CSV or MSSQL to
MSSQL, for example, you will use the Edit Connection function.
1. On the Data Source tab, click the Remove Connection button. The warning message
shown below appears:
2. Click Yes to continuing removing the connection. All Joins, Filters and Sorts you have
created for the current data source will be removed and the data source connection
parameters (the path to a file/SQL settings, etc.) will be deleted from the project.
The Data tab will appear as shown below after the connection is removed.