Wasp Barcode WaspLabeler +2D User Manual - Manual (Page 189)

185
Wasp Labeler User Manual
5.1.3 Print Tab Properties Box - Starting Label and Order
• Beginning Label - This option allows you to select where on the page of labels you want to
start printing. This is a useful feature if you want to continue printing on a partially printed label
sheet.
To use this feature:
1. Click the Select button next to the Beginning Label field. The Select Beginning
Label field appears.
The preview pane shows how many labels are on the page (as per the label format you
selected on the
Page Setup screen).
2. Click on the label in the preview pane where you want to start printing. Or, you can
enter the Row and Column number in the Label fields.
3. Click OK when you are done making your selection. The Print Preview pane on the
Print tab will update to reflect your selection.
• Order - You can use this feature to tell Labeler in what order to print the labels on the page.
Your options are:
Across, then down - this tells the printer to start at the left side of the page, print across, then
go down one row and across.
Down, then across - this tells the printer to print all the way down the column on a page, then
across to the next column and down.