Western Digital My Net Wi-fi Range Extender User Manual - Manual (Page 11)

GETTING STARTED
8 MY NET WI-FI RANGE EXTENDER
USER MANUAL
Getting Started
This chapter contains the following topics:
Setting up Your Extender
Configuring Your Extender After Initial Setup
Tuning for Distance and Coverage
Setting up Your Extender
1. Set the frequency switch to the frequency of the router (2.4 GHz or 5 GHz).
Note: If you don’t know whether your router is dual-band, leave the switch set to
2.4 GHz.
2. Connect the extender to a power source and press the Power button. The power LED
on the front of the extender blinks during boot-up and goes solid once the process is
complete.
3
1