Western Digital My Net Wi-fi Range Extender User Manual - Manual (Page 29)

CONFIGURING ADVANCED SETTINGS
26 MY NET WI-FI RANGE EXTENDER
USER MANUAL
Using the Reset button
To reset the extender manually:
1. Press and hold the Reset button on the bottom of the extender.
When the reset finishes, the Power LED blinks.
2. Wait until the reset finishes before using the extender.
Rebooting
You can reboot the extender two ways. If you are physically close to it, just press the On/Off
button on the extender. If you cannot easily press the button:
1. Click the Advanced Settings icon and then the System tab on the left of the screen.
2. Click Reboot.
Logging Out
On the Admin / System screen, click Logout.
Registering the Extender
Register your router to receive software notifications and customer support.
1. On the Admin screen, click the Registration tab on the left of the screen to display the
Admin / Registration screen.
2. Enter your name and email address, and click Register.