Western Digital My Net Wi-fi Range Extender User Manual - Manual (Page 15)

GETTING STARTED
12 MY NET WI-FI RANGE EXTENDER
USER MANUAL
4. Select a Network Name (or click anywhere in its row) and click Connect. If you do not
see your router’s name in the list, enter it in the Use another network field at the bottom
of the screen and click Connect .
The Secure Network Connection screen displays.
Note: For an open (unsecured) system, this screen does not appear.
5. If the router does not support WPS or WPS is not enabled, the following screen
displays:
Enter the network password and click Enter. Continue to step 9.
6. If the router supports WPS, the following screen displays:
You have two options for configuring the extender’s security:
Enter the router’s password and click Enter. Continue to step 9.
Use WPS. Continue to step 7.