Resetting the extender to factory defaults – Western Digital My Net Wi-fi Range Extender User Manual User Manual
Page 28
Advertising
CONFIGURING ADVANCED SETTINGS
25
MY NET WI-FI RANGE EXTENDER
USER MANUAL
Resetting the Extender to Factory Defaults
You may want to reset the extender to how it was when you bought it. You have two options
for restoring factory defaults: through the user interface or through the Reset button on the
back of the extender.
Using the Dashboard
1. On the Admin screen, click the System tab on the left to display the Admin / System
screen:
2. Click Reset to the right of Reset to Factory Default Settings.
3. When a confirmation message displays, click OK.
4. Wait until the extender reboots before using it.
WARNING!
Do not reboot the extender while the reset is taking place. The
extender reboots as part of the reset process.
Advertising