Selecting a language – Western Digital My Net Wi-fi Range Extender User Manual User Manual
Page 30
CONFIGURING ADVANCED SETTINGS
27
MY NET WI-FI RANGE EXTENDER
USER MANUAL
Selecting a Language
To change the language of the extender’s screens:
Note: Auto represents the language of the browser.
1. On the Admin screen, click Language on the left to display the Admin / Language
screen:
2. Select a language from the Select language drop-down list.
3. Click Change.
Setting the Signal Strength LEDs
You have the option of setting the display of the signal strength LEDs on the front of the
extender.
1. On the Admin screen, click Signal Strength LED on the left to display the Admin/Signal
Strength LEDs screen:
By default, the signal strength LEDs are always on.
2. If you prefer to have the LEDs display for just the first two minutes during the wireless
connection process, toggle the Enable Always On indicator to Off and click Save.