Yamato Scientific BH500 Thermo-Elite - Manual (Page 13)

10
Description and function of each part
Control panel
① POWER key:
Key to change over the controller from the standby mode to the
operation mode or from the operation mode to the standby mode.
② MODE key:
Key to select a function from program input, edit, delete modes,
hour/time setting, change-over mode, and other functions.
③ DISPLAY key:
Key to change-over the display content of the sub display (10).
Display content is changed over to set temperature, remaining
time, hour, execution segment No.
④ MENU key:
Key to select the operation mode. Each mode of fixed
temperature, auto-start, auto-stop and program operation can be
selected.
⑤ ENTER key:
Key to determine the input value of set value (temperature, time,
hour, etc.), selection mode, execution segment No. etc.
⑥/⑦ ▼▲(UP/DOWN)
key:
Key to change set value (temperature, time, hour, etc.) and to
choose a selection from various parameters on the function
menu.
⑧ ESCAPE key:
Key to cancel the latest entry and recover the status that was
valid prior to the making the latest selection.
⑨ Main Display:
It displays temperature measurements, set values (temperature,
time, hour, etc.), program information, error information, etc.
①
②
③
④
⑤
⑧ ⑩
⑨
⑪
⑪a
⑪b
⑪c
⑪e
⑪f
⑫
⑬
⑭
⑮
⑯
⑪d
⑥ ⑦