Yamato Scientific BH500 Thermo-Elite - Manual (Page 40)

37
Flowchart of Operational Procedures
Program “MODE”
It will appear on the sub
display.
MODE
The key lock will disable
you from doing the key
action.
Display
The total time for the power being on can
be shown on the sub display.
The alarm will be
sounded.
▲▼keys
ENTER key
In case of a period of time
Time/Hour switching
function
Set the Christian era
by using either the
▲ key or the ▼ key.
Main display
Select the timer mode that you
want to run in hour mode or in
a period of time mode while
running each operation.
In case of the hour
Key lock setting/
releasing function
Select the key lock
mode.
Alarm buzzer ON/OFF
function
Set the alarm to be sounded or not if a
problem occurs.
Accumulating time (Accm)
Diplay the total time for the
power being on.
Date and current hour
setting function (cLoK)
Set the date and hour.
ENTER key
ENTER key ENTER key
ENTER key ENTER key
▲▼keys
▲▼keys
The key action will get
active.
ENTER key ENTER key ENTER key ENTER key
The alarm will not be
sounded.
ENTER key ENTER key
Set the date by
using either the ▲
key or the ▼ key. Set the hour by
using either the ▲
key or the ▼ key.
See the programming flowchart.
Deleting programs
Select the programs
number that you want
delete.
▲ ▼
NOTE:If there are no programs, this will not
appear.
*The number of existing
programs will appear on the sub
display.
Inputting and deliting
programs (ProG)
Programming
ENTER key ENTER key
Set the strength of
stream by using euther
the ▲ key or the ▼ key
while circulating.
The strength of stream
can be set in the range
from 1 to 10. Stream strength
setting function