Yamato Scientific BH500 Thermo-Elite - Manual (Page 14)

11
Description and function of each part
Control panel
⑩ Sub Display:
It displays set temperature, remaining time, current hour and
execution segment No. etc.
⑪ Operation monitor: It indicates an operation mode.
⑪-a STANDBY lamp:
It flashes to indicate that the instrument is in the preoperational
standby mode.
⑪-b Temperature pattern
lamp:
It illuminates to indicate the heat treatment process pattern
executed by the controller with flashing light indicating the point
currently in execution.
⑪-c OVER lamp: It flashes to indicate the end of auto-stop or program operation.
⑪-d TROUBLE
indicator lamp:
It blinks when an error is detected and displays the
corresponding code for that particular problem.
⑪-e REMOTE operation
indicator lamp:
It illuminates when the instrument is put into remote operation
(optional) and displays the word “REMOTE
REMOTE REMOTE REMOTE.”
⑪-f KEY LOCK
indicator lamp:
It illuminates to indicate that the operation panel key lock
function is in operation.
⑫ Operation menu
indicator lamp:
It illuminates to indicate the active operation mode in the
operation menu.
⑬ Sub display menu
indicator lamp:
It illuminates to indicate the item (set temperature, remaining
time, hour or execution segment) shown in the sub display.
⑭ HEAT ON indicator
lamp:
It illuminates when the heater is on.
⑮ TIME indicator lamp:
It illuminates when the operation starting time of the auto-start
and the operation completion time of the auto-stop is set in the
hour setting mode.
⑯ Independent
Temperature
Overheating
Prevention Device:
Setting the instrument to the operational temperature of the
independent over rising prevention.