Yamato Scientific BH500 Thermo-Elite - Manual (Page 15)

12
Operation method
attention :
Operate according to the following procedures when the preparation for the
operation is complete.
1. Turning on of power supply
Turn on the leak breaker in the back of the
controller.
The lighting display is done by a sub display
at present time.
Push the POWER key in the operation panel.
This machine becomes a stand-by state by
turning on the power supply. Under such a
condition, it is possible to shift to all
operation modes by pushing the MENU key.
2. Selection of operation menu
Press the MENU key several times to select
desired operating method.
It allows you to enter each parameter into a
flashing menu.
3. Explanation of operation menu
Fixed temperature ： It is a drive method of setting the temperature of the target and
keeping the temperature constant.
Auto stop ： It is a drive method of stopping the state that a fixed value is driven
at arbitrary after time passes or clock time.
Auto start ： It is a drive method the fixed value drive's beginning at after
arbitrary time passes or clock time.
Program ： The operation is begun and is stopped at after arbitrary time passes
or clock time. Moreover, the temperature can be changed at arbitrary
set time and it be repeated.