Yamato Scientific BH500 Thermo-Elite - Manual (Page 24)

21
Strength setting of circulating pump
1. Function menu
selection
First of all, Push the
MODE key. Next, Make a
main display display
PUMP with ▲▼ keys and
push the ENTER key.
The MODE key is pushed.
Press ▲▼ keys several times.
A main display is made to
display PUMP.
The ENTER key is pushed.
Sub-display displays
PUMP allowing you to set
strength of circulating
pump to a sub display.
2. Set input
Make a main display
blinking display arbitrary
strength by pushing ▲▼
keys and push the ENTER
key.
Press ▲▼ keys several times.
A main display displays
strength of the pump.
ATTENTION
Strength of the pump is 1-10.
10 is strongest circulation strength.
The ENTER key is pushed.