Rockwell Automation 20P PowerFlex DC Drive - Frame D Bimetal Thermostat - Manual (Page 7)

7
Publication 20P-IN061A-EN-P
Important: Prior to removing the SCR assembly, ensure that the area around
the drive is clear of equipment. Only lift the assembly using the
handles provided.
8. Loosen the six hexalobular screws that secure the phase U SCR module leg
assembly to the back wall of the drive chassis.
9. Using the two handles, lift the SCR assembly up and off the mounting
screws and lift the assembly up and forward so that the output terminals
clear the holes in the bottom of the drive frame.
Loosen
screws Loosen
screws
Lifting
handle