Rockwell Automation 20P PowerFlex DC Drive - Frame D Bimetal Thermostat - Manual (Page 9)

9
Publication 20P-IN061A-EN-P
Step 5: Close the Control
Panel, Install the Protective
Cover and Document the
Change 1. Close the control panel and install the protective cover in the reverse order
as detailed in Step 2: Remove the Protective Cover and Open the Control
Panel on page 3 .
2. Record the installation of the new bimetal thermostat and date of
installation on the Field Installed Option label on the side of the drive (as
shown below).
Related Documentation Allen-Bradley publications are available on the internet at
www.rockwellautomation.com/literature .
For . . . Read this document
Publication
Number
In depth information regarding the
operation of PowerFlex Digital DC drives User Manual - PowerFlex Digital DC Drives 20P-UM001…