Rockwell Automation 20L-LL PowerFlex 700L Liquid-to-Liquid Heat Exchanger - Manual (Page 12)

1-2 Installation
PowerFlex 700L Liquid-to-Liquid Heat Exchanger User Manual
Publication 20L-UM002A-EN-P
Lifting Instructions
The heat exchanger can be lifted off the shipping skid by removing the
packing material from the unit and unscrewing the mounting brackets lag
screws from the skid.
Using a Lift Truck
Forks a can be inserted between the exchanger legs from the front or sides
as long as the forks extend beyond the opposite surface. Note: Bottom
sections of the exchanger are open.
Using Rigging Straps
Rigging straps should be placed under the unit and along the sides to lift
from the top. These straps should be long enough to provide fill tube
clearance on the top.
Figure 1.1 Heat Exchanger Dimensions and Coolant Connections
619 Max.
(24.4)
127 Max.
(5.0)
616 Max.
(24.3)
TOP
REAR FRONT
688 Max.
(27.1)
FILL TUBE
CONTROL
WIRING
POWER
TO DRIVE
INLET
RETURN TO
SUPPLY
102 Min.
(4.0)
172
(6.8)
304
(12.0)
258
(10.18)
289
(11.38)
740 Max.
(29.1)
31 Max.
(1.25)
38
+0.25/
-0.00
(1.5) 781 Max.
(30.77)
INLET FROM SUPPLY
(Strainer shipped loose)
SUPPLY
DRAIN DRIVE
DRAIN
FROM DRIVE OUTLET Fluid Level
Data
Nameplate
Electrical
Box
STATUS
Indicator
POWER
Indicator
PRIME SWITCH
Dimensions are in
millimeters and (inches).
Heat Exchanger
Approximate Weight
Empty (no coolant)
20L-LL13K-P75A 113 kg (250 lbs.)
20L-LL24K-1P0A 113 kg (250 lbs.)