Appendix a, Supplemental heat exchanger information, Specifications – Rockwell Automation 20L-LL PowerFlex 700L Liquid-to-Liquid Heat Exchanger User Manual
Page 33: Control board replacement fusing, Appendix
PowerFlex 700L Liquid-to-Liquid Heat Exchanger User Manual
Appendix
A
Supplemental Heat Exchanger Information
Specifications
Control Board Replacement
Fusing
The control board replacement fusing is 0.5A Time Delay MDL.
Category
Specification
Heat Exchanger Catalog Number
20L-LL13K-P75A
20L-LL13K-P75A
20L-LL24K-1P0A
Used with PowerFlex 700L:
Frame 2
Frame 3A
Frame 3B
Agency
Certification
Listed to UL1995, UL778, CAN/CSA-C22.2 No. 236, and CAN/
CSA-C22.2 No. 108-01.
Marked for all applicable European Directives
EMC Directive (89/336/EEC)
EN 61000-6-2 Generic standards - Immunity for industrial
environments
EN 61000-6-4 Generic standards - Emission standard for industrial
environments
Low Voltage Directive (73/23/EEC)
EN 60204-1 Safety of Machinery - Electrical equipment of machines
- Part 1: General requirements
EN 61800-5-1:2007 Adjustable speed drives - Safety requirements:
clauses 4.4.5, 5.2.7
Environment
Ambient Temperature:
0 to 50°C (32 to 122°F) 0 to 40°C (32 to 104°F) 0 to 40°C (32 to 104°F)
Storage Temperature:
-40 to 85°C (-40 to 185°F)
Atmosphere:
Important: Heat exchanger must not be installed in an area where the
ambient atmosphere contains volatile or corrosive gas, vapors or dust. If
the heat exchanger is not going to be installed for a period of time, it
must be stored in an area where it will not be exposed to a corrosive
atmosphere.
Relative Humidity:
5-95% non-condensing
Shock:
10G peak for 11 ms duration (±1.0 ms)
Vibration:
0.152 mm (0.006 in.) displacement, 1G peak, 5.5 Hz.
Electrical Input
Input VAC:
115/230/230 VAC ±10%, 1 Phase
Pump HP:
1.0/1.0/1.0
Frequency:
60/60/50 Hz
Maximum Input Amps:
15.8/8.2/8.4 Amps
Short Circuit Rating:
5,000 Amps
Drive Loop
Heat Dissipation:
13,000 Watts
13,000 Watts
24,000 Watts
Flow @ Pressure:
30.3 LPM at 1.58 bar
(8 GPM at 23 PSI)
30.3 LPM at 1.58 bar
(8 GPM at 23 PSI)
56.8 LPM at 2.07 bar
(15 GPM at 30 PSI)
Temperature Range:
0-50°C (32-122°F)
0-40°C (32-104°F)
0-40°C (32-104°F)
Supply Loop
Minimum Flow @ Pressure:
15.1 LPM at 0.83 bar
(4 GPM at 12 PSI)
22.7 LPM at 0.83 bar
(6 GPM at 12 PSI)
56.8 LPM at 0.83 bar
(15 GPM at 12 PSI)
Maximum Pressure:
8.62 bar (125 PSI)
8.62 bar (125 PSI)
8.62 bar (125 PSI)
Temperature Range:
0-40°C (32-104°F)
0-35°C (32-95°F)
0-35°C (32-95°F)
U
c
US
L
®