Rockwell Automation 56AMXN ControlLogix/AutoMax/Communication/Module - Manual (Page 5)

DCSNet/RE RIO Module 5
Publication 56AMXN-IN002A-EN-P November 2002
Enclosure and Environmental Requirements Specific To This Product
The 56AMXN/B is NOT suitable for use in hazardous locations.
This product must be mounted within a suitable system enclosure to prevent
personal injury resulting from accessibility to live parts. The interior of this enclosure
must be accessible only by the use of a tool. This industrial control equipment is
intended to operate in a Pollution Degree 2 environment, in overvoltage category II
applications, (as defined in IEC publication 664A) at altitudes up to 2000 meters
without derating.
Preventing Electrostatic Discharge
The 56AMXN/B module is sensitive to electrostatic discharge.
Electrostatic discharge can damage integrated circuits or
semiconductors if you touch backplane connector pins.
Follow these guidelines when you handle the module:
• Touch a grounded object to discharge static potential
• Wear an approved wrist-strap grounding device
• Do not touch the backplane connector or connector pins
• Do not touch circuit components inside the module
• If available, use a static-safe work station
• When not in use, keep the module in its static-shield
packaging
For additional information refer to publication 1770-4.1, Industrial Automation
Wiring and Grounding Guidelines.