Rockwell Automation 56AMXN ControlLogix/AutoMax/Communication/Module - Manual (Page 6)

6 DCSNet/RE RIO Module
Publication 56AMXN-IN002A-EN-P November 2002
ATTENTION
Identify Module Features
Refer to the following figure to identify the hardware components of the
56AMXN/B module.
NET OK CLX
DCSNet / RE RIO
XXXX
Network
The module has:
• A label to indicate that it is a scanner for AutoMax
DCSNet and remote I/O
• A 4-character scrolling display (XXXX)
• 3 LEDs, labelled NET, CLX, and OK, to indicate the
status of the network, the connection to the
ControlLogix processor, and its own internal state
• a 9-pin D-shell connector to connect to the DCS or
remote I/O network
• switches at the top of the module to set the mode of
operation and the drop number and drop depth