Rockwell Automation 20B PowerFlex 700 Power Jumpers - Manual (Page 3)

PowerFlex 700 Power Jumpers 3
Publication 20B-IN021B-EN-P
Jumper Installation, Removal and Storage
PowerFlex 700 drives utilize plug-in style jumpers/jumper wires. Most drives
will have a jumper storage area inside the front cover. Extra jumpers or jumpers
that have been removed should be stored in this location for use at a later time.
Insulating Jumper Wires
Some drives are designed to utilize nylon screws and spacers to
insulate jumper wires from ground and secure them to the chassis.
The components must be installed as shown.
Drive Identification
Refer to the drive nameplate and
locate the “Voltage Code,”
“Current Rating,” “Frame” and
“UL Type” (Frames 5…6). Use
this information to locate the
proper procedure in the following
tables.
Cat No. 20B D xxx x x xxxxxxx
Made in the USA (TAC 1J)
Rockwell Automation, Mequon WI 53092-4400
UL TYPE 1/IP20
Mfd. in 2007 on Aug 1 Frame: 3
Serial Number: xxxxxxx
Series: B
I/O: 24VAC/DC (Standard)
Original Firmware V. x.xxx
Listed
Ind. Cont
Eq. 966X
U c US L
®
Normal Duty Power
Heavy Duty Power
AC Voltage Range
Amps
Input: 3 Phase, 47-63Hz
Output: 3 Phase, 0-400 Hz
AC Voltage Range
Base Hz (default)
Continuous Amps
1 Min Overload Amps
3 Sec Overload Amps
xxx kW
xxx kW
342-440
xxx
0-400
50 Hz
xxx
xxx
xxx
xxx kW
xxx kW
432-528
xxx
400V 480V
0-460
60 Hz
xxx
xxx
xxx
N223
Voltage Code
Frame
Current Rating UL Type