Step 1: removing cover(s) phase ii drives – Rockwell Automation 20D-RES-A0 PowerFlex 700S Resolver Feedback Option User Manual
Page 4
Advertising
![background image](/manuals/577013/4/background.png)
4
Resolver Feedback Option Card for PowerFlex® 700S Drives
Step 1: Removing Cover(s)
Phase II Drives
It is necessary to remove the cassette from the drive before removing the
cassette covers for Phase II control. Therefore the first set of tasks in Step 1
involve cassette removal.
BR1
BR2
DC+
DC-
PE
U/T1
V/T2
W/T3
R/L1
L2
(x2)
=
(x2)
(x3)
Proper tightening
torque for reassembly
is 6 lb.-in.
Removing the Cassette
Task Description
Open the door of the power structure and disconnect the
cables that connect to the main board
Loosen screws on face of cassette
Remove the cassette
A
B
C
Removing the Side Covers
Task Description
Loosen screws on face of front cover and
remove the cover
Loosen screws on side of rear cover and
remove the cover
A
B
B
C
A
B
=
A
Advertising