Rockwell Automation 20D DriveLogix Controller for PowerFlex 700S Phase I Drives - Manual (Page 10)

10 DriveLogix Controller for PowerFlex 700S Phase I Drives
Step 8: Installing the New
DriveLogix Controller
Assembly
Task Description
Align the slotted hole in the mounting tab on the DriveLogix Controller
assembly with the stud on the mounting bracket.
Align the stacker connectors on the DriveLogix Controller assembly with the
mating connector on the control assembly.
Insert the stacker connector pins in to the mating holes on the control
assembly and install the DriveLogix Controller assembly on the control
assembly.
A
B
C
A
B
C