Connecting to flex i/o – Rockwell Automation 20D DriveLogix Controller for PowerFlex 700S Phase I Drives User Manual
Page 12
Advertising
![background image](/manuals/577161/12/background.png)
12
DriveLogix Controller for PowerFlex 700S Phase I Drives
Step 10: Connecting the
DriveLogix Controller to a
Device
Connecting to Flex I/O
1. Connect the mini-D connector end of a 4100-CCF3 cable to the
FLEXBUS connector on the controller.
TIP: Remember to route the cable through the sliding access panel at the
bottom of the Control assembly.
Advertising