Rockwell Automation 20D DriveLogix Controller for PowerFlex 700S Phase I Drives - Manual (Page 14)

14 DriveLogix Controller for PowerFlex 700S Phase I Drives
1. Select the appropriate cable.
•
The 1756-CP3 cable attaches to the DriveLogix Controller directly to
another controller.
•
If you make your own cable, it must be shielded and the shields must be
tied to the metal shell (that surrounds the pins) on both ends of the cable.
•
You can use a 1747-CP3 cable (from the SLC product family). This
cable has a taller right-angle connector housing than the 1756-CP3 cable.
2 RDX
3 TXD
4 DTR
COMMON
6 DSR
7 RTS
8 CTS
9
1 CD
2 RDX
3 TXD
4 DTR
COMMON
6 DSR
7 RTS
8 CTS
9
1 CD