Rockwell Automation 440R MSR42 Control Module User Manual - Manual (Page 17)

15
Light Curtain Multi-Function Control Module User Manual
Original instructions
Document Control Number: SEN-0394-B-EN 1 / 2
EC Declaration of Conformity
The undersigned, representing the manufacturer and the authorised representative established within the
Community
Rockwell Automation, Inc.
2 Executive Dr.
Chelmsford, MA 01824
USA Rockwell Automation BV
Rivium 1e Straat, 23
2909 LE Capelle aan den IJssel
Netherlands
Herewith declare that the Products: MSR4x Safety Base / MSR4xE Expander Controller Modules
Product identification (brand and
catalogue number/part number): Allen-Bradley 440R-P and 445L-1 Series
(reference the attached list of catalogue numbers)
Product Safety Function The MSR4x safety base control devices and the MSR4xE extension modules
can be used in applications up to Safety Category 4 (EN 954-1)/ SIL3/SIL
CL3 (EN 61508 / EN 62061) and PL e (EN ISO 13849-1).
are in conformity with the essential requirements of the following EC Directive(s) when installed in accordance with
the installation instructions contained in the product documentation:
2006/42/EC Machinery Directive
2004/108/EC EMC Directive
and that the standards and/or technical specifications referenced below have been applied:
EN 61496-1:2004 + A1:2008 Safety of machinery – Electro-sensitive protective equipment – Part 1: General
requirements and tests
IEC 61496-2:2006 Safety of machinery – Electro-sensitive protective equipment – Part 2:
Particular requirements for equipment using active opto-electronic protective
devices (AOPD’s)
EN ISO 13849-1:2008 Safety of machinery – Safety-related parts of control systems – Part 1: General
principles for design
EN 61508 Parts 1-7:1998-2000 Functional safety of electrical/electronic/programmable electronic safety-
related systems
EN 954-1:1997 Safety of machinery – Safety related parts of control systems – Part 1: General
principles for design
EN 50178:1997 Electronic equipment for use in power installations
EN 62061:2005 Safety of machinery – Functional safety of safety-related electrical, electronic
and programmable electronic control systems
EN 60204-1:2006 Safety of machinery – Electrical equipment of machines – General
requirements
EN 61000-6-4:2007 Electromagnetic compatibility (EMC) – Part 6-4: Generic standards –
Emission standard for industrial environments (Class A)
EN 61000-6-2:2005 Electromagnetic Compatibility (EMC) – Part 6-2: Generic standards –
Immunity for industrial environments
Manufacturer: Authorised Representative in the Community:
Signature Signature
Name: Daniel L. Nachtigall Name: Viktor Schiffer
Position: Supv – Product Certification Engineering Position: Engineering Manager
Date: 01-Mar-2011 Date: 08-Mar-2011