Rockwell Automation 25B PowerFlex 525 Embedded EtherNet/IP Adapter User Manual
Page 97
Rockwell Automation Publication 520COM-UM001B-EN-E - March 2013
97
Using Multi-Drive Mode
Chapter 7
Differences Found Screen
3.
The Drive tab displays a screen of the drive.
If the download is successful, the Drive tab will show a green
indicator in the upper right corner of the window. This tab is extremely
useful for configuring drive parameters, accessing start-up wizards and
troubleshooting. Note that there is a tab for the master as well as each of
the daisy-chained drives.
4.
Click OK to close the Module Properties window for the drive.
Multi-Drive Ladder Logic
Program for Generic Profile
The following is an example of the ladder logic program for the Generic Profile
and demonstrates using Multi-drive mode with five drives. See
Mode Example for Network on page 84
for an example of a system layout
TIP
You may now use the automatically generated tags to create your
controller logic.