Rockwell Automation 20G PowerFlex 750-Series EMC Plate and Cores - Frames 1…7 - Manual (Page 8)

8 Rockwell Automation Publication 750-IN006G-MU-P - February 2014
PowerFlex 750-Series EMC Plate and Core(s) – Frames 1…7
7
IP00
Step Frame Procedure
6
continued
x12
T30
5.2 N•m (46.0 lb•in)
#1
x4
x8
Input Power (R, S, T)
Shielded or Unshielded
Motor Cable (U, V, W)
Shielded
x2
M6 (10 mm)
5.2 N•m (46 lb•in)
x4
For use on Frame 7 IP00 drives. After
installation, the drive achieves an IP20 rating.
The cable shield and drain wires must be
terminated at the shield clamp on the conduit
plate. The ground wire must be connected to
the PE stud in the drive; however, it should not
pass through the core.